Overview
Craig and Rose Artisan Stone Effect Paints will create an architectural effect in your home. Ideal for use on interior walls and architectural features these effects can create a mid-century or Scandinavian-style schemes. The fast drying time of only four hours allows you to complete your creative project all in one day and the water-based formulation will not leave any lingering nasty smells in your home.
The stone effects are suitable for low-wear areas and should not be applied in wet areas or absorbent surfaces. These special effect paints are part of the Artisan range from Craig & Rose which was created to bring bold and beautiful effects to every home.
- Ideal for creative projects
- Creates an architectural feature wall
- Fast drying and quick recoat times
- Luxurious finish
| Area | Interior |
| Recommended Use | Walls |
| Base | Water-Based |
| Coverage | Charcoal - Up to 10m² per litre Castaway - Up to 5m² per litre European Stone - Up to 5m² per litre |
| Drying Time | Touch dry in 2-4 hours |
| Re-Coat Time | 4 hours |
| Recommended Coats | 2 coats |
| Application Method | Brush and Roller |
| Clean Up | Remove as much paint as possible then clean all tools with warm soapy water |
Preparation
For best results with Craig and Rose Artisan Stone Effect Paints thoroughly prepare the surface.
- Remove any loose or flaking paint by sanding with an abrasive paper.
- Fill any holes or cracks with a suitable filler, for walls, we recommend as it is quick and easy to use.
- Seal bare or porous surfaces with .
- Lightly abrade any previously painted surfaces to allow the paint effects to adhere.
- Ensure the surface is clean and free from any dust, dirt, or grease.
Application
Always test the application method on a small area to ensure you are happy with the finished results.
- Stir the paint thoroughly, if using more than one tin combine the Artisan Effect into one container.
- The first coat can be applied with a synthetic brush or medium pile synthetic roller.
- Allow the first coat to dry for four hours.
- The final coat must be applied with a wide synthetic brush in a random brush stroke action to achieve the effect. Ensure to overlap brushed areas to achieve an even effect.
- Please be aware these paints can dry a lot lighter.
Always follow the manufacturer's instructions found on the tin. Do not apply the Stone Effect paints in temperatures below 5°C and avoid exposure to steam and condensation for 48 hours.
